ROHO DRY FLOATATION Wheelchair Cushions Operation Manual
Cushion Adjustment, continued
To adjust the QUADTRO SELECT Cushion or the CONTOUR SELECT Cushion to accommodate a
fixed pelvic obliquity or a fixed posterior pelvic tilt:
1) Follow all cushion adjustment instructions in this operation manual to make sure the cushion is
adjusted to a Proper Cushion Inflation Setting.
2) The individual should sit in their normal position while the air transfers through the ISOFLO
Memory Control.
3) When the air transfer is complete, push the red knob toward the locked position.
4) Re-check each compartment of the cushion to ensure a Proper Cushion Inflation Setting.
To adjust the QUADTRO SELECT Cushion to correct a flexible pelvic obliquity or a flexible
posterior pelvic tilt:
- Follow all cushion adjustment instructions in this operation manual to make sure the cushion is
adjusted to a Proper Cushion Inflation Setting.
- Make sure the ISOFLO Memory Control is in the unlocked position
- Follow the instructions below.
Flexible pelvic obliquity:
1) Manually correct to the desired pelvic position. (For example, if the left side of the pelvis is
lower than the right side, either have the individual lean toward the right, or place downward
pressure on the right hip until the desired position is achieved.)
2) Push the red knob toward the locked position.
3) Re-check each compartment of the cushion to ensure a Proper Cushion Inflation Setting.
Flexible posterior pelvic tilt:
1) Check to make sure there is approximately 1" (2.5 cm) of space between the individual's
bony prominences and the seating surface. Add more air if needed.
2) Lift both of the individual's knees to put more downward pressure on the pelvis and to force
air to the front of the cushion. This will create a "well" (a lower, concave area) for the pelvis
and will help prevent the pelvis from sliding forward.
3) Push the red knob toward the locked position.
4) Re-check each compartment of the cushion to ensure a Proper Cushion Inflation Setting.
Locked
7
Unlocked