Technical Data; Machine Features; Operation; Settings - Festool HK 85 EB Manual De Instrucciones

Never use machine with any abrasive wheels.
Only saw materials for which the relevant saw
blade has been designed.
The portable circular saw can be transformed
into a biscuit joiner using an adjustable groov­
ing cutter conversion kit supplied by Festool.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in­
tended use.
4

Technical data

Portable circular saw
Power output
No-load speed
Inclination
Cutting depth at 0°
Max. cutting depth at 45°
Max. cutting depth at 60°
Saw blade dimensions
Weight (without mains ca­
ble)
5

Machine features

[1-1]
Handles
[1-2] Switch-on lock
[1-3] Lever for changing blades
[1-4] Retractor lever for pendulum guard
[1-5] Guide wedge
[1-6]
Pendulum guard
[1-7] On/Off switch
[1-8]
Lever for plunge function
[1-9] Split scale for cutting depth stop
(with/without guide rail)
[1-10] Rotating extractor connector
[1-11] Angle scale
[1-12] Knob for angle setting
[1-13] Cutting depth adjuster
[1-14] Adjustable jaws
[1-15] Mains power cable
[1-16] Speed control
[1-17] Insulated gripping surfaces (grey
The illustrations specified are located at the be­
ginning and end of the operating instructions.
6
Unauthorised voltage or frequency!
Risk of accidents
► Observe the specifications on the ma­
HK 85 EB
chine's name plate.
1900 W
► Observe country-specific regulations.
3500 rpm
0 – 60°
power cable!
0 - 86 mm
6.1
62 mm
► Slide switch-on lock [1-2] upwards.
► Press the ON/OFF switch [1-7].
47 mm
Press = ON
230 x 2.5 x
Release = OFF
30 mm
7
6.8 kg
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
7.1
Smooth start-up
The electronically controlled smooth start-up
function ensures that the power tool starts up
smoothly.
Speed control
You can continuously adjust the speed within
the speed range using the adjusting
wheel [1-16] (see Technical data). This enables
you to optimise the cutting speed to suit specific
surfaces (see Section
Current limiting
Current limiting prevents excessive current
consumption under extreme overload, which
can lead to a decrease in the motor speed. The
motor immediately restarts after the load is re­
moved.
shaded area)

Operation

WARNING
Always switch the machine off before
connecting or disconnecting the mains
Switch on/off

Settings

WARNING
Electronics
8.5 ).
English
21