Preparing The Cover Frame; Fastening The Cover Frame - Dometic COOLAIR SP 950T Instrucciones De Montaje

Installation
7.8

Preparing the cover frame

A
NOTICE!
Screw the screws in carefully order not to damage the cover frame.
➤ Unless you have a Renault Trucks specific cover, place the cap (fig. 8 2,
page 6) included in the supply in the cover frame.
➤ Fasten the cap (fig. 8 2, page 6) with the four cylindrical screws M4 x 12
(fig. 8 1, page 6), washers M4 (fig. 8 3, page 6) and the self-locking nuts
M4 (fig. 8 4, page 6).
7.9

Fastening the cover frame

A
NOTICE!
Screw the screws in carefully order not to damage the cover frame.
See fig. 9, page 7
➤ Fasten the cover frame (6) to the unit with the four cylindrical screws
(M6 x 60 mm) (8), washers (7) and the four spacer sleeves L = 48 mm (5). The
spacer sleeves keep the cover frame apart from the unit.
22
CoolAir SP950T
EN