Technical Data; Intended Use; Machine Features - Festool RTS 400 REQ Manual De Instrucciones Original

Vibration emission
level (3 directions) a
h
Uncertainty K
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
4

Technical data

Orbital sander
Power
No-load speed
1
Max. speed
Sanding stroke
Sanding pad
Weight (without mains cable, with sanding pad)
1.
Max. speed in the event of faulty electronics.
5

Machine features

[1-1] On/Off switch
[1-2] Plug it-connection
[1-3] Speed control
[1-4] Extractor connector
[1-5] Sanding pad
[1-6] Protector
[1-7] Long-life dust bag
[1-8] Dust bag adapter
[1-9] Handle (insulated gripping surface)
The specified illustrations appear at the beginning
of the Operating Instructions.
DTS 400 REQ RTS 400 REQ
2
3,5 m/s < 2,5 m/s
2
1,5 m/s 1,5 m/s
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
2
note of idling and downtimes of machine!
3

Intended use

2
The sanders are designed for sanding wood, plas-
tic, stone, composites, paint/varnish, filler and sim-
ilar materials as directed. Metals and materials
that contain asbestos must not be processed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
The user is liable for improper or non-in-
tended use.
DTS 400REQ
250 W
6000 - 12000 rpm
16000 rpm
2.0 mm
100 x 150 mm
1.2 kg
6 Commissioning
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
Heating of the Plug it connection if bayonet fitting
is not completely locked
Risk of burns

Before switching on the power tool, make sure
that the bayonet fitting at the mains cable is
closed fully and locked.
Connecting and detaching the mains power cable -
see Fig. [2].
DTS 400 REQ, RTS 400 REQ
RTS 400REQ
250 W
6000 - 12000 rpm
16000 rpm
2.0 mm
80 x 130 mm
1.2 kg
WARNING
CAUTION
GB
13