F3 - Terminal Menu - Mettler Toledo IND221 Instrucciones De Manejo

F2.3 – Reference optimization
This parameter only appears if F2.1=Count is set.
No reference optimization
OFF
Reference optimization enabled. The weighing terminal automatically determines
ON
the piece weight again when the number of parts has increased.
F2.10 – Reset F key settings
Reset all parameters F2.x(.x) to factory setting.
5.4 F3 – terminal menu
Factory settings are printed with bold characters.
F3.1 – Display settings
F3.1.1 – Sleep mode
The weighing terminal switches to sleep mode when during the set time no action on the
weighing terminal or no change in weight occurred.
Factory setting
Function disabled
Possible settings
F3.1.2 – Brightness with battery operation
low brightness
Lo
high brightness
MEd
To save battery power, we recommend the Lo setting.
F3.2 – Auto power off
The weighing terminal is switched off if during the set time no action was on the weighing
terminal or on the weighing platform.
Factory setting
Function disabled
Possible settings
F3.3 – Battery type
This menu item is only available with weighing terminals in battery operation.
dry battery
drY
NiMH rechargeable battery
ni-MH
LEAd-A lead-acid rechargeable battery
60 (seconds)
0
10 ... 999 (seconds)
5 (minutes)
0
0.5 ... 60 (minutes)
21