Introduction; Safety Precautions - Mettler Toledo IND221 Instrucciones De Manejo

1 Introduction

1.1 Safety precautions

CAUTION!
Do not use IND221 / IND226 in hazardous areas!
Our product range includes special devices for hazardous areas.
CAUTION!
Use the IND226 weighing terminal with Protection Class IP65 if:
• the weighing terminal is used in wet areas
• wet cleaning is necessary
• the weighing terminal is used in a dusty environment
Even with Protection Class IP65, the weighing terminal must not be used in
environments with corrosion risk.
▲ Never flood the weighing terminal or immerse it in liquid.
DANGER!
Electric shock hazard!
▲ Always unplug power cord before performing any work on the weighing
DANGER!
Hazard of electric shock if the power cable is damaged!
▲ Check the power cable for damage regularly. Unplug the power cord im-
▲ Maintain a clearance of at least 3 cm on the rear side of the weighing
CAUTION!
Do not open the weighing terminal!
The warranty is void if this stipulation is ignored. The weighing terminal may
only be opened by authorized persons.
▲ Call METTLER TOLEDO Service.
terminal.
mediately if the power cable is damaged.
terminal in order to prevent the power cable from bending too much.
5