Setting The Scanning Time (Scan Time); Cd Mode; Switching To Cd Mode - Blaupunkt Seattle MP57 Instrucciones De Manejo

Radio mode
Cancelling the scan and continuing to
listen to a station
u Press the OK button B.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
(Scan Time)
u Press the MENU button A.
The menu is displayed.
u
Press the softkey "Various Settings"
9.
The "Various" menu is displayed.
u Press the softkey "Scan Time" :.
The current setting is displayed.
u
Press the or
button > to set the desired
or
scanning time.
When you have fi nished making your
changes,
u press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD-changer as well as
MP3 mode.
button @ or the

CD mode

You can use this device to play standard
audio CDs, CD-Rs and CD-RWs with a diam-
eter of 12 cm.
Risk of severe damage
to the CD drive!
CD singles with a diameter of 8 cm and
noncircular contoured CDs (shape CDs)
must not be used.
We accept no responsibility for any dam-
age to the CD drive that may occur as a
result of the use of unsuitable CDs.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besides being able to play audio CDs on this
device, you can also play CDs containing
MP3/WMA music fi les. For further informa-
tion, please read the chapter entitled "MP3/
WMA mode".

Switching to CD mode

If there is no CD inserted in the drive,
button 1.
u
press the
The control panel opens.
u
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
CD mode
19