Operating Modes; Available Operating Modes; Standard Charging Mode; Refresh Charging Mode - akkuteam VAS 5903 Instrucciones De Uso

Operating modes

Available opera- Overview of available operating modes. Important additional information on the individual
operating modes can be found in the following sections.
ting modes
Use standard charging mode for:
Standard char-
-
ging mode
-
-
Important! if the battery reaches full charge in trickle mode, the charger automatically
switches to conservation mode.
Refresh charging Refresh charging mode is used to charge the battery if it is suspected that the battery
mode has been deeply discharged over a long period (e.g. battery sulphated)
-
-
Important! The success of refresh charging depends on the degree of sulphation of the
battery.
Standard charging
For batteries with liquid (Pb, GEL, Ca, Ca silver) and fixed (AGM,
MF, sealant) electrolyte
Refresh charging
For reactivating batteries with liquid (Pb, GEL, Ca, Ca silver) and
fixed (AGM, MF, sealant) electrolyte
External power supply
External power supply to consumers and backup for the vehicle
battery
Current input test
Used to test a battery's ability to accept charge
charging/conservation charging with battery either fitted or removed
in back-up mode (to supply power to the vehicle electronics whilst the battery is
changed)
in trickle mode (to charge the battery when consumers are switched on in the
vehicle)
battery is charged to maximum acid concentration
plates are reactivated (degradation of sulphate layer)
CAUTION! Danger of damage to the in-car electronics by refresh charging.
Before beginning refresh charging, disconnect battery from vehicle power
supply.
NOTE! refresh charging may only be used when:
- the battery capacity has been correctly set
- refresh charging takes place in a well-ventilated area
6