Starting Charging Manually (Deep-Discharge Battery); Charging - akkuteam VAS 5903 Instrucciones De Uso

Starting charging 1.
manually (deep-
discharge battery)
2.
3.

Charging

1.
2.
Important! the charger automatically switches over to conservation charging after
approx. 3 - 7 hours, depending on the type of battery.
this length of time.
Once the charging terminals are connected, press start/stop button for approx. 5
secs
WARNING! Risk of serious damage as a result of incorrectly connected char-
ging terminals. The reversal polarity protection facility is inoperative if charging
is started manually (battery voltage < 1.0 V). Connect charging terminals to
correct poles and ensure proper electrical connection to vehicle terminals.
Ensure charging terminals are connected to correct poles
Starting charging
If there is no confirmation of correct pole connection within 2.5 secs, the device
reverts to menu mode.
During charging, the number of bars indicates how charging is progressing.
Final charging stage - once the battery is approx. 80 - 85 % charged
To charge the battery completely, the battery should remain connected to the charger for
NOTE! Only in Refresh charging mode:
When refresh charging has finished, the machine switches off. Conservation
charging does not take place.
- Display shows 6 consecutive bars
- Battery is now ready for use
10