DELAY TIME
submenu
(delay time)
1.
2.
3.
Important! Delay time must be set again after each cycle. If the power fails, the count-
down stops. Once the power is restored, the countdown continues where it left off.
DEVICE VERSI-
ON submenu
1.
2.
Access the submenu
Set delay time. Setting range: 0 - 4 h
Save the selected time and exit the submenu
Access the submenu
Toggle between the Firmware version, Boot program, Hardware and Exit displays by
pressing the arrow keys.
Firmware
Displays the stored firmware version
Boot program
Displays the stored boot program version
24