Horizon Fitness T101 Manual Del Propietário página 8

ASSEMBLY STEP 2
I HARDWARE BAG 2 CONTENTS : ]
BOLT (A) SPRING WASHER (B) FLAT WASHER (C)
20 mm 15 mm 15 mrn
Qty: 4 Qty: 4 Qty: 4
_._ BOLTS (A)
• _
SPRING WASHERS (B)
(C)
A
B
C
Open HARDWARE BAG 2.
Pull LEAD WIRE through RIGHT CONSOLE
MAST. After pulling the lead wire through the
mast, the top of the CONSOLE CABLE should
be located at the top of the mast. Detach and
discard the lead wire.
With the RUNNING DECK in the raised
position, attach the RIGHT CONSOLE
MAST to the BASE FRAME using 4 BOLTS
(A), 4 SPRING WASHERS (B) and 4 FLAT
WAS H E RS (C).
NOTE: Be carefu ! n0tt0 pinc h any Wires
while assembling the right console mast.