Adjustment And Adaptation Possibilities - Otto Bock Lisa Manual De Instrucciones

• Engage the lock with a quarter turn of the locking knob so that the bolt locks into the footrest
(Fig. 9).
Danger!
After you have finished all adjustments, snugly re-tighten the screws that have been
loosened.
Attention!
Make sure the footplate has securely locked by giving it a few short tugs.
To fold the LISA, you proceed as follows:
• Remove the accessories from the LISA.
• Unlock the footrest in the reverse order as described and fold it away to the side.
• Release the brake.
• Bring the backrest to upright position and pull the lock open.
• Proceed in reverse order as described under "unfolding"
• Finally, secure with the transport lock.

4 Adjustment and Adaptation Possibilities

Footrest
Upon delivery, the footrest and the two footrest bars are not mounted.
To carry out the assembly, proceed as follows:
• Connect the free footrest bar to the footplate (Fig. 8+9).
• For assembly, turn the footrest receivers at the front frame to the front and insert the footrest/
footrest bars into the footrest receivers from below (Fig. 10).
• Before tightening the screws, make sure that the footrest bars are at the same height and the
footrest receivers are locked to prevent distortion.
9 10
37