5 Accessories
Note!
All accessories not installed by the manufacturer must be installed by trained techni-
cians.
The following notes on installation are listed here for technician use.
Before installation of many accessories, the leather strips must be cut open. To do this first
mark the leather. Next pre-punch the start and end of the cut with a hole punch and finally
make a cut that connects two holes.
Straps on accessories are usually extra long to accommodate most positions.
Excess strap ends can be cut off, and the cut edge melted together with a flame (cigarette
lighter) in order to prevent fraying.
Note!
The accessories which always have to be removed before folding the rehab buggy/ stroller
are marked with a dot (⊗).
5.1 Abductor
The abductor is screwed to the folding scissor construction under the seat (Fig. 23).
To ease getting into and out of the LISA, fold the abductor forward (Fig. 24).
To unlock, fold the abductor in direction of the seat bottom, press it down and keep it pressed
down while folding the abductor forward.
Attention!
The storage bag can be loaded up to a maximum of 5 kg (11 lbs).
The storage bag must be emptied before folding the LISA.
23
24
41