baltur TBL 45P Manual De Instrucciones página 17

eLeCTrODes/iOnisaTiOn PrOBe
aDJUsTmenT Diagram
Legend:
1- Diffuser
2- Flame disc
3- Nozzle holder
model
1 ÷ 2
TBL 45P
1 ÷ 2
TBL 60P
After having installed the nozzle, check the correct position of the
electrodes and disk according to the following levels.
It's necessary to perform a test of the values after every intervention
on the head.
To prevent damage to the support effect nozzle assembly/
disassembly tasks with the aid of a wrench and counter-
wrench.
RECOMMENDED NOZZLES:
DANFOSS S 60° (TBL 45P)
DANFOSS S 45° (TBL 60P)
For narrow combustion chambers, it is recommended to use
nozzles with a 45° pulverisation angle
15 / 28
0006081349_201307
4- Ignition electrodes
5- Nozzle
a B C D
21 7 5
21 7 5
e
6,5
6,5