Structure Of The Safety Instructions; General Safety Instructions - Ottobock 9X50 Instrucciones De Uso

The product is intended exclusively for the control of myoelectric system
components for the upper limbs.
3.2 Qualification of the orthopaedic technician
Fitting a patient with the product may only be carried out by orthopaedic
technicians who have been authorised by Ottobock after completion of a
corresponding training course.
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE

4.2 Structure of the safety instructions

CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe
the safety instructions. Consequences are presented as follows if more
than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried
out in order to avert the hazard.

4.3 General safety instructions

CAUTION
Faulty adjustment
Injury due to faulty control or malfunction of the product.
► When mounted into a provisional socket, the product may only be worn
within an orthopaedic workshop or as an inpatient in a rehabilitation
facility.
CAUTION
Penetration of liquids
Injury due to faulty control or malfunction of the product.
12 | Ottobock