Deflectors And Cutting Attachments - Stihl FSA 130 Manual De Instrucciones

3 Overview
5 Retaining latch
The retaining latch unlocks the trigger switch together
with the trigger lockout. It is also used to select the power
level.
6 LEDs
The LEDs indicate the selected power level.
7 Trigger
The trigger switches the brushcutter on and off.
8 Trigger lockout
The trigger lockout unlocks the trigger together with the
retaining latch.
9 Wing screw
The wing screw secures the handlebar to the handle
support.
10 Handlebar
The handlebar connects control handle and handle with
the shaft.
11 Handle
The handle is for holding and controlling the brushcutter.
12 Shaft
The shaft connects all components.
13 Opening for stop pin
The opening for the stop pin accommodates the stop pin.
14 Stop pin
The stop pin blocks the shaft while a cutting attachment
is being mounted.
15 Gear housing
The gear housing encloses the gearbox.
16 Screw plug
The screw plug closes the filler opening for STIHL gear
grease.
# Rating plate with machine number
0458-726-9821-C
3.2

Deflectors and Cutting Attachments

The illustrations show examples of deflectors and cutting
attachments. Approved combinations are listed in this
instruction manual, @ 20.
1
2
3
4
1 Universal deflector
Protects user from flying debris and contact with the
cutting attachment.
2 Grass Cutting Blade
Cuts grass and weeds.
3 Brush Knife
Cuts brushwood.
4 Line Limiting Blade
Trims mowing line to correct length.
5 Skirt
Extends universal deflector for use with a mowing head.
6 Deflector for Mowing Heads
Protects user from flying debris and contact with the
mowing head.
7 Mowing Head
The mowing head contains the mowing line.
English
6
4
7
9
5
10
8
37