Adjusting The Bike Handle; Inserting And Removing Connecting Cable Plug; Inserting The Connecting Cable Plug; Removing The Connecting Cable Plug - Stihl FSA 130 Manual De Instrucciones

English
► Let go of the trimmer and check to see how it is balanced
- the cutting attachment should just rest on the ground.
► If the trimmer cannot be balanced: Change the attachment
point of the carabiner (1) on the carrying strip (2) and
check balance again.
7.5

Adjusting the Bike Handle

The bike handle can be set to different positions to suit the
height and reach of the user.
► Switch off the brushcutter and pull the connecting cable
plug out of the socket.
► Hook the brushcutter from the carrying strip into the
carabiner of the carrying system.
► Loosen the wing screw (1).
► Swing the bike handle (2) to the required position.
► Tighten down the wing screw (1) firmly.
54
2
1

8 Inserting and Removing Connecting Cable Plug

8 Inserting and Removing Connecting
Cable Plug
8.1

Inserting the Connecting Cable Plug

► Hold connecting cable plug (1) so that the arrow on its side
lines up with the arrow on the socket (2).
► Insert the connecting cable plug (1) in the socket (2).
The plug (1) engages in position.
8.2

Removing the Connecting Cable Plug

► Grip the connecting cable plug (1) with your hand.
► Pull the plug (1) out of the socket (2).
1
2
1
2
0458-726-9821-C