Information For User - Medel SOFT Manual Del Usuario

rement result, date and time. Press "MEM" button again, it
will display the next record,and so on. During the process
of displaying the results, if there is no operation, the blood
pressure monitor will turn off in one minute. Or you can press
"START/STOP" button to turn it off. (pic. 6.B).
It means the total
records is 5, the
current No. is No. 1.
CAUTION
The most recent record (1) is shown first. Each new measurement
is assigned to the first (1) record. All other records are pushed back
one digit (e.g., 2 becomes 3, and so on), and the last record (60)
dropped from the list.
3.2 DELETE THE RECORDS
If you did not get the correct measurement, you can delete all results
by followings steps below.
1. Hold pressing "MEM" button for 3 seconds when the monitor
is in the memory recall mode, the "dEL All" will flash on the
display (pic. 7.A).
2. Press "MEM" to confirm deleting , the LCD displays " dEL
donE" and the monitor will turn off (pic. 7.B).
Note: To exit out of delete mode without deleting any records, press
START/STOP button before pressing "MEM" to confirm any delete
commands.
3. If there is no record, the right display will show (pic. 7.C).

4. INFORMATION FOR USER

4.1 MAINTENANCE
To obtain the best performance, please follow the in-
structions below.
• Put in a dry place and avoid the sunshine
• Avoid immersing it in the water. Clean it with a dry cloth in
case.
• Avoid shaking and collision.
• Avoid dusty environment and unstable temperature surroun-
The corresponding
th
date is May 14 .
The corresponding
time is 8:16.
EN
23