Emc Guidance - Medel SOFT Manual Del Usuario

10

EMC Guidance

1)This product needs special precautions regarding EMC and needs
to be installed and put into service according to the EMC informa-
tion provided,
and this unit can be affected by portable and mobile RF communi-
cations equipment.
2)* Do not use a mobile phone or other devices that emit electro-
magnetic fields, near the unit. This may result in incorrect operation
of the unit.
3)Caution: This unit has been thoroughly tested and inspected to
assure proper performance and operation!
4)* Caution: This machine should not be used adjacent to or stacked
with other equipment and that if adjacent or stacked use is neces-
sary, this machine should be observed to verify normal operation in
the configuration in which it will be used.
Table 1
Guidance and manufacturer's declaration – electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below. The customer or the
user of the device should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Compliance Electromagnetic environment - guidance
The device uses RF energy only for its internal
function. Therefore, its RF emissions are very low
Group 1
and are not likely to cause any interference in nearby
electronic equipment.
The device is suitable for use in all establishments,
other than domestic and those directly connected to
Class B
the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Class A
Complies
EN
29