Technical Data; Symbols; Intended Use; Electrical Connection And Operation - Festool RTS 400 EQ Manual De Instrucciones

Technical data

Wattage
No load speed
No. of strokes
Sanding stroke
Sanding base (delta form)
Weight
Safety level
5000 - 14000 rpm
10000 - 28000 spm
2.0 mm (0.079 in.)
80 x 130 mm (3.1 x 5.1 in.)
1.1 kg (2.4 lbs.)
200 W
Warning of general danger
Read the Operating Instructions/Notes!
Wear protective goggles
/ II
Wear a dust mask
V volts
A amperes
Hz hertz
W watt
~ alternating current
n no load speed
0
Class II Construction
rpm revolutions per minute
spm strokes per minute
The sanders are designed for sanding wood, plastic,
composite materials, paint / varnish, fi lling mate-
rial and similar materials. Metal and materials
with an asbestos content must not be processed
with these tools.
The machine is particularly suitable for processing
smaller surfaces and overhead work because of its
size, its weight and its output.
The machines must not be damp nor operated in a
damp environment for electrical safety reasons. The
machines may only be used for dry sanding.
for any damage or accidents resulting from incor-
rect use.
The mains voltage must correspond with the voltage
on the rating plate!
See the following Fig. for connecting or disconnect-
ing the power cord of the tool.
connecting or disconnecting the power cable!
5

Symbols

Intended use

The user bears sole responsibility
Electrical connec-
tion and operation
Always switch the machine off before