The Pic Ctrl (Picture Control) Menu; Video Memory - Sony VPH-G90E Manual De Instrucciones

The PIC CTRL (Picture Control) Menu

[User/Pro-user modes]
The PIC CTRL menu is used for adjusting the picture.
Items that can be adjusted are highlighted in green.
You cannot select the items indicated in white.
V I D E O M E M O R Y
PIC
CTRL N o . 1 0
1 6 : 9 N T S C S I G N A L
SET
SETTING1 C O N T R A S T
B R I G H T
SET
SETTING2 C O L O R
H U E
INPUT
INFO. S H A R P
SEL: SET: ENTER

VIDEO MEMORY

Selects the number of video memory 1 to 10.
V I D E O
V I D E O M E M O R Y
PIC
CTRL N o . 1 0
1 6 : 9 N T S C S I G N A L
SET
SETTING1 C O N T R A S T
B R I G H T
SET
SETTING2 C O L O R
H U E
INPUT
INFO. S H A R P
SEL: SET: ENTER
EXIT: MENU
The video memory is a part of the SET MEMORY,
and stores 10 types of the aspect ratio, picture quality,
etc.
Select a video memory number 1 to 10, then the
aspect ratio and picture quality that you adjust will be
stored in the selected video memory.
If you want to use the aspect ratio and picture quality
data stored in the INPUT MEMORY, select OFF.
Contents of the video memory data
COLOR TEMPERATURE, D. PICTURE, V SHIFT
WIDE/NARROW, COMPONENT FORMAT, COMB
FILTER, DRC LEVEL, CONTRAST, BRIGHT,
COLOR, HUE, SHARP, RGB SIZE, RGB SHIFT,
BLANKING
V I D E O
8 0
5 0
5 0
5 0
5 0
EXIT: MENU
8 0
5 0
5 0
5 0
5 0
To select the number of video memory
After selecting VIDEO MEMORY, press the b or
ENTER key. The following VIDEO MEMORY select
menu appears. Select the desired number with the v
and V keys, then press the B or ENTER key.
Z V I D E O M E M O R Y
4
N o . L A B E L
1 4 : 3 S T S C S I G N A L
2 1 6 : 9 N T S C S I G N A L
3 4 : 3 S E C A M S I G N A L
4 1 6 : 9 S E C A M S I G N A L
5 4 : 3 P A L S I G N A L
6 1 6 : 9 P A L S I G N A L
7 4 : 3 P A L - M S I G N A L
8 1 6 : 9 P A L - M S I G N A L
SEL: SET: ENTER EXIT: MENU
Aspect ratios preset at the factory
The data for the following aspect ratios have been
stored in each video memory number at the factory.
No. Aspect ratio
1 4 : 3
2 4 : 3
3 4 : 3
4 4 : 3
5 4 : 3
6 16 : 9
7 16 : 9
8 16 : 9
9 16 : 9
10 16 : 9
To change the video memory label (in Pro-
user mode only)
You can change the label of the video memory to
match the memory contents.
When the VIDEO MEMORY select menu is
displayed, select the number you want change its label
and press the b key. The following display appears.
[ 4 : 3 N T S C S I G N A L ]
A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z .
0 1 2 3 4 5 6 7 8 9 - _ * :
N n OK CANCEL
SEL: ENTER
SET: EXIT: MENU
Move the cursor to the desired letter with the v/V/B/b
keys, then press the ENTER key. The selected letter is
displayed in the [ ] at the top of the screen. You can
select up to 18 letters by repeating the same procedure.
After selecting the letters, move the cursor to OK, then
press the ENTER button. The display is returned to
the VIDEO MEMORY select menu.
Adjustments and settings using the menu
29
(GB)