Installing The Brake Spur; Installing The Transport Wheel - Stihl MH 600 Manual De Instrucciones

7.4 Installing the brake spur

● Tilt the basic unit forwards as shown.
● 1 Insert brake spur (H) into adapter (1)
from below.
● 2 Fasten at lowest bore (2) with
pin (3).
● 3 Secure pin (3) with spring clip (4).
● Check that brake spur (H) is seated
securely.
56
● Fasten the brake spur with bolt (Y).

7.5 Installing the transport wheel

● Tilt the basic unit backwards as shown
and support at the brake spur.
● Remove spring clip (1) and remove
pin (2) from the transport wheel.
● Pull out retaining pin (3), unscrew
castellated nut (4) and remove together
with washer (5).
● Remove bolt (6) from the transport
wheel.
● Place transport wheel (1) onto
frame (2).
0478 404 9602 A - EN