Installing The Guard Plate; Installing The Drive Control Lever; Installing The Covers - Stihl MH 600 Manual De Instrucciones

7.9 Installing the guard plate

Installing the right guard plate
● Fasten right guard plate (D) to the
guard plate holders at the front and rear
using bolts (X), washers (U) and
nuts (T).
Installing the left guard plate
● Fasten left guard plate (E) to the guard
plate holders at the front and rear using
bolts (X), washers (U) and nuts (T).
0478 404 9602 A - EN

7.10 Installing the drive control lever

● Unscrew nut (1) and bolt (2) at the
control lever mount.
● Fit drive control lever (G) onto the
control lever mount and fasten with
bolt (1) and nut (2).

7.11 Installing the covers

● Fit engine cover (I) onto bracket (1).
● Push bracket (1) inwards so that engine
cover (I) can be threaded onto the
bracket.
59