Installing The Lower Handlebar; Installing The Upper Handlebar - Stihl MH 600 Manual De Instrucciones

● Fasten transport wheel (1) at the rear
bore with bolt (2), washer (3) and
castellated nut (4).
● Secure castellated nut (4) by bending
up retaining pin (5).
● Additionally secure transport wheel (1)
with pin (2) and spring clip (3).
0478 404 9602 A - EN

7.6 Installing the lower handlebar

● Fit lower handlebar (F) onto mount (1)
on the basic unit.
● Pull release lever (handlebar lateral
adjustment) (1) upwards and then allow
to engage in centre position (2).
● Fasten lower handlebar with bolt (M).

7.7 Installing the upper handlebar

Danger of crushing!
There is a danger of pinching when
actuating the release lever (height
adjustment).
Pay attention to moving parts!
Make sure that the cables are
positioned correctly. They must not
be knotted.
57