Cleaning The Machine - Stihl MH 600 Manual De Instrucciones

Risk of injury!
Always wear gloves to
prevent injuries from
sharp-edged
components.
The hoe assembly together with the
plant protection disc can be
removed from the drive shaft by
removing the folding retainer next
to the gearbox housing.
The plant protection discs and hoes
are removed in the same way on
both sides.
Removing the plant protection discs:
● Allow the machine (engine, gearbox) to
cool down completely.
● Lift the tiller slightly in a horizontal
position with the help of a second
person.
● Fold open the securing clip of folding
retainer (1) and remove the folding
retainer.
● Remove plant protection disc (2).
68
Removing the hoes:
● Allow the machine (engine, gearbox) to
cool down completely.
● Lift the engine slightly in a horizontal
position with the help of a second
person.
● Fold open the securing clip of folding
retainer (1) and remove the folding
retainer.
● Remove hoe (2).

12.2 Cleaning the machine

Cleaning interval:
After each use
● Clean the entire machine thoroughly
after each use. Care of the machine will
protect it against damage and extend its
service life.
● Before cleaning, allow the machine to
cool down completely, detach the spark
plug socket and wear long sleeves and
thick gloves during cleaning work on the
gearbox and hoes.
Cleaning position:
● Move the machine onto firm and level
ground.
● Set the upper handlebar to the lowest
level.
● Detach spring clip (1) and remove
pin (2).
● Remove the brake spur together with
adapter (3).
● Rest the machine on the handlebar.
Notes on cleaning:
● Do not leave the machine in the
cleaning position for longer than it takes
to clean it.
0478 404 9602 A - EN