Tabla de contenido
Publicidad
70 mm x 198 mm (3 in. x 8 in.) 10,000 OPM Orbital Sanders (See "Product Configuration/Specifications" Table for particular Model)
to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008.
Following the provisions of 89/392/EEC as amended by 91/368/EEC, 93/44/EEC & 93/68/EEC Directives and consolidating Directive
Jeppo 16.01.2014
Place and date of issue
Operator Instructions
Includes – Warranty, Please Read and Comply, Proper Use of
Tool, Work Stations, Putting the Tool Into Service, Operating
Instructions, Product Configuration/Specifications Tables,
Parts Page, Parts List, Sander Spare Parts Kits, Trouble
Shooting Guide, Service Instructions
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm
3/8 in
Declaration of conformity
KWH Mirka Ltd.
66850 Jeppo, Finland
declare on our sole responsibility that the products
2006/42/EC
Company
Important
Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Recommended Maximum
Hose Length
8 meters
25 feet
4
MIRKA 10,000 OPM
70 mm x 198 mm (3 in. x 8 in.)
ORBITAL SANDERS
Stefan Sjöberg, Executive Vice President
Safety Glasses
Breathing Masks
Safety Gloves
Ear Protection
Maximum Working Pressure
Recommended Minimum
Air Pressure
6.2 bar
90 psig
NA
NA
Publicidad
Tabla de contenido
