SOMFY Oximo 50 S Auto io Guia De Instalacion página 35

CONTENTS
1. Introduction
2. Safety
2.1. Safety and responsibility
2.2. General safety advice
2.3. Specific safety advice
3. Kit contents
4. Installation
4.1. Fitting the Oximo io Module
4.2. Preparing the Tubular S Module
4.3. Tube preparation
4.4. Assembling the Tubular S Module - tube 4
4.5. Fitting the Oximo io Module with the tube
equipped with the Tubular S Module
5. Wiring
6. Commissioning
6.1. Identifying setting steps already
completed
6.2. Pre-programming the Somfy io local
control point
1. INTRODUCTION
The Oximo 50 S Auto io is a short motor which programs the end limit settings automatically.
The Oximo 50 S auto io motor comprises two inseparable components:
• Oximo io Module: component which contains the electronics and the motor radio
• Tubular S Module: component which contains the drive part of the motor.
The Oximo 50 S auto io motor is designed to drive roller shutters fitted with rigid links and end stops
selected in accordance with the operating conditions described below.
The Oximo 50 S auto io motor can be mounted either on the right or the left.
The Oximo 50 S Auto io is fitted with:
- obstacle protection to protect the roller shutter when it is being lowered.
- anti-freeze protection to protect the roller shutter when it is being raised.
What is io-homecontrol
The Oximo 50 S Auto io uses io-homecontrol
protocol, shared by worldwide leaders in the world of home equipment. io-homecontrol
comfort and security equipment to communicate each other and be controlled from a single control
point.
The flexibility and perfect compatibility of the io-homecontrol
your needs evolve. You can start by automating your shutters and the front door, then equip the
outside awnings, the gate and garage door or garden lighting with the io-homecontrol
Even when fitted at different times, all of this equipment remains compatible with the existing
installation, thanks to the use of io-homecontrol
For further information,
please visit the website at
www.io-homecontrol.com
Copyright © 2010 Somfy SAS. All rights reserved.
1 6.3. Checking the motor's direction of rotation 6
6.4. Confirming the automatic settings
2
2 7. Operation
2 7.1. Standard operation
2 7.2. Operating with a Somfy io sun sensor
3 8. Additional settings
8.1. Favourite position (my)
3
8.2. Adding/Deleting Somfy io control points
3
and io sensors
3
8.3. Modifying the direction of rotation
4
9. Tips and recommendations
9.1. Questions on the Oximo 50 S Auto io? 7
4 9.2. Replacing a lost or broken Somfy io
control point
4
9.3. Restoring the original configuration
5
10. Technical data
5
5
®
?
®
, the new universal and secure wireless communication
® technology that guarantees interoperability.
®
io-homecontrol provides advanced and secure radio technology that is easy to install.
®
io-homecontrol labelled products communicate with each other, improving comfort,
security and energy savings.
Oximo 50 S Auto io
®
system provides support for you as
www.io-homecontrol.com
6
6
6
7
7
7
7
7
7
8
8
8
® enables all
® system.
1