8.1 LAMP REPLACEMENT
CERAMIC lamps are at high internal pressure when cold and at
operating temperature; therefore, CERAMIC lamps may unexpectedly
rupture resulting in discharge of hot fragments of quartz and/or glass
and metal.
Only handle lamps with protective covers in place. Do not handle lamps
without their protective covers unless government approved safety
glasses, facemasks (with neck protector, chest protector and
gauntlets) are worn.
Always disconnect power cord and turn main switch off before lamp
replacement.
CAUTION
Take utmost care not to hit gas-seal edge of lamp; it may cause gas
lamp failure.
CAUTION
Do not touch the lamp and patient simultaneously when changing the lamp.
CAUTION
Use only p/n SSX0035 lamp module for replacement. In order for this Lightsource to
perform as designed SSX0035 must be used. Failure To use this lamp could void the
warranty.
Open lamp compartment door and pull out lamp cartridge.
Replace lamp cartridge with new unit and log the serial number and hours on the hour meter.
Close the lamp compartment door. Re-connect the power cord and turn the light source on
according to 6.1. Reset hour meter to zero by depressing hour meter reset button on rear
panel.
NOTE
If the tamper seal on the lightsource is broken, the WARRANTY WILL BE
VOIDED. There are no other user serviceable parts in the unit.
8.2 LIMITED WARRANTY
Your fiberoptic product(s) carry a 3-year warranty from the date of shipment on
workmanship and all defects of material, excluding replaceable sweatbands, headbands,
fiberoptic cable and lamps. Should your product prove to have such defects within three
years of the shipment, SUNOPTIC TECHNOLOGIES
component part without charge. Should your fiberoptic product(s) need servicing under this
warranty,
please
documentation. You should carefully pack unit in a sturdy carton and ship it to the factory.
Please include a note describing the defects, your name, telephone number and a return
address.
Warranty does not cover equipment subject to misuse, accidental damage,
LIT125
SUNOPTIC SURGICAL
(English)
contact
SUNOPTIC
®
WARNING
®
will repair or replace the product or
®
for
TECHNOLOGIES
Date of Revision: 03/28/17
return
authorization
Rev. H
Page 10 of 72