Outlet Chute And Blast Breaker Control - JF 2 Serie Manual Técnico De Operación

OPERATION TECHNICAL MANUAL - HARVESTER JF C40 C60 and C120 SERIES 2

5.7- Outlet chute and blast breaker control.

A) Remote Mechanical control
- Chute turn handle (1).
- Auger (2).
- Blast breaker control lever (3).
- Spindle rod (4).
Control installation
The support (5) of the remote control should be installed
in the tractor's properest part, where the operator has
easy access and can perform all the operations in a
quick and proper way.
It is the responsability of the owner of the machine set
the most appropriate location for the installation of the
command.
Outlet chute position
a) Move the chute up the desired position turning the
handle (1).
Blast breaker position
a) Move the lever (3) forward or backward, adjusting the
blast breaker opening.
B) Semi-hydraulic command
- Blast breaker control lever (3).
- Piston of the turning outlet chute (6)
Position of the outlet chute
Activate the hydraulic control regarding the turning of
the outlet chute to move it (instructions for assembly the
hoses, see Hydraulic Command on the next page).
Blast breaker position
a) Move the lever (3) forward or back-ward, adjusting
the blast breaker opening.
4
2
5
3
3
1
6
27