Scope Of Delivery; Installation Set; Filter Cartridge; Technical Data - HOUNO PROTECT S Instrucciones De Montaje

12

1 Scope of delivery

1.1 Installation set

The Hydro Shield installation set comprises the following components:
Filter head with internal thread for mounting the filter cartridge, suitable for all Hydro Shield filter
cartridge sizes. (Integrated into the filter head are an Aquastop and a return valve.)
Bracket for mounting the filter cartridge.
3 Hoses with gaskets for water connections
T-fitting for direct tap-water supply to drain cooling and hand shower if applicable.
Installation instructions.
The installation kit PN 30500327 is available on hounoshop.com
1.2

Filter cartridge

The Hydro shield filter pack contains the filter cartridge with hygiene cap and the installation and
operating instructions. The Hydro Shield cartridges S PN 30500544, L PN 30500545, XL PN
30500546 are available on hounoshop.

2 Technical data

2.1

Dimensions and weights

HYDRO SHIELD
Total height without bracket (A)
Total height with bracket (B)
Connection height (C)
Distance from floor (D)
Installation length (E)
Filter cartridges Ø (F)
Weight of filter cartridge, dry (approx.)
Weight of filter cartridge, wet (approx.)
2.2

Operating conditions

HYDRO SHIELD
Connection thread (intake/outlet))
Nominal flow
Working pressure range
Intake water pressure
Pressure loss at 30 L/h ¹
Pressure loss at 60 L/h ¹
Pressure loss at 180 L/h ¹
Water temperature, min.–max.
Ambient temperature, min.–max.
Ambient temperature during storage/transportation, min.–max.
Bed volume
Operating position
Typical capacity at 14 d°GH
Chlorreduktion gemäß Abschnitt 5.5.2 EN 14898:2006
The actual capacities in operation can be higher or lower than the capacities stated in the table. The capacities depend on the quality of the input water, the flow
rate, the intake water pressure and the flow continuity.
The total hardness reduction is reached in accordance with Section 5.5.5 EN 14898:2006 for the stated capacities.
S
mm 410-420
mm 445
mm 366
mm 65
mm 125
mm 110
kg 2.1
kg 3.2
S
L/h
bar
bar
bar 0.10
bar 0.15
bar 0.50
°C
°C
°C
L 1.50
L 1.070
Class 1
L XL
492-502 570-580
527 600
448 520
65 65
125 125
147 185
3.8 7.5
6.0 11.0
L XL
3/8"
60
2 – 8
> 1.2
0.10 0.20
0.15 0.30
0.50 0.60
+ 4 to + 30
+ 4 to + 40
- 20 to + 40
3.10 6.50
horizontal or vertical
2.785 4.535
1 1