Sleep Timer; Using A Password (Av Mode Only); Entering A Password - Pioneer PDP-505HDG Manual De Instrucciones

Sistema de monitor de plasma
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Useful Adjustment Settings

Sleep Timer

When the selected time elapses, the Sleep Timer
automatically places the system into the standby mode.
1
Press HOME MENU.
2
Press
/
to select "Sleep Timer", and then press
ENTER.
3
Press
/
to select the desired time, and then
press ENTER.
Sleep Timer
Remain 90min
Off
30min
60min
90min
120min
• You can select from among "Off" (cancel),
"30 min", "60 min", "90 min", and "120 min".
4
Press HOME MENU to exit the menu.
• Five minutes before the selected time elapses, the
remaining time appears every minute.
• To check the remaining time, do steps 1 and 2.

Using a password (AV mode only)

This system provides the Child Lock function for pre-
venting children from watching inappropriate
programs. You need to enter a password when
watching programs with "Block" specified. Before the
system is shipped, "1234" is preset as the factory-
default password. You can however, change the pass-
word as you want.
When using the Home menu you select "Auto Installa-
tion", "Program Setup", or "Password", a screen
prompting password entry appears to prevent others
from changing the program settings at their choices.

Entering a password

In a case where you select a channel blocked with
Child Lock or password entry is requested when at-
tempting to open the menu, enter a password correctly.
1
Enter a correct 4-digit password using buttons
0 – 9.
Please Input Your Password.
• If you fail password entry three times, "Invalid pass-
word." appears, and the menu is closed. In order to
display the password entry screen again to unlock
the password, select the blocked channel or open the
menu again.
11
61
En

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pdp-435hdg

Tabla de contenido