Standard Spare Parts; Ce - Manufacturer's Declaration Of Conformity - Viking MB 4 R Manual De Instrucciones

– Product modifications not approved by
VIKING.
– Use of fuel and lubricants not approved
by VIKING (lubricants, petrol and
engine oil, see engine manufacturer's
specifications).
– The use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality.
– Improper use of the product.
– Use of the product for sporting or
competitive events.
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
0478 111 9924 C - EN
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

16. Standard spare parts

Mowing blade (mulching blade)
6383 702 0100
Blade fastening screw
9008 319 9067
Retaining washer
0000 702 6600
The fastening elements for the
mowing blade (e.g. blade fastening
screw, retaining washer) must be
replaced when replacing the blade,
i.e. when installing the blade. Spare
parts are available from a VIKING
specialist dealer.
17. CE - manufacturer's
declaration of conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
Manually-operated lawn mower with
combustion engine (MB)
manufacturer's VIKING
brand:
type: MB 4.0 R
MB 4.0 RT
MB 4.0 RTP
Serial number 6383
conforms to the following EU directives:
97/68/EC, 2000/14/EC, 2004/108/EC,
2006/42/EC
The product has been developed in
conformance with the following standards:
EN ISO 5395-1, EN ISO 5395-2
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Johann Weiglhofer
VIKING GmbH
The year of manufacture and serial
number appear on the identification plate
of the machine.
MB 4.0 R, MB 4.0 RT:
Measured sound power level:
93.1 dB(A)
Guaranteed sound power level:
94 dB(A)
MB 4.0 RTP:
Measured sound power level:
91.2 dB(A)
Guaranteed sound power level:
93 dB(A)
43