Special Accessories; Maintenance And Repairs - Stihl FC 70 Manual De Instrucciones

Engine
Single cylinder two-stroke engine
Displacement: 27.2 cm
(1.66 cu.in)
Bore: 34 mm (1.34 in)
Stroke: 30 mm (1.18 in)
Engine power to 0.9 kW (1.2 HP)
ISO 8893: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 10,000 rpm
Max. output shaft
speed (cutting blade): 8,100 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor
type): NGK CMR 6 H
Electrode gap: 0.5 mm (0.02 in)
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 0.34 L
(11.5 fl.oz)
Weight
dry, with deflector and
blade 6.1 kg (13.4 lbs)
FC 70 C

Special Accessories

Contact your STIHL dealer for
3
information regarding special
accessories that may be available for
your product.

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. Other repair work may be
performed only by authorized STIHL
service shops.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using original STIHL
replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and, in some cases, by the STIHL
parts symbol K. The symbol may
appear alone on small parts.
English
31