Product Components; Replacement Parts - Hach SC4200c Manual Básico Del Usuario

3.3 Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 2 Product components
1 SC4200c controller
2 Mounting hardware
3 Sealing gasket for panel mount, Neoprene
4 Vibration isolation gasket for pipe mount
5 Vibration isolation washer for pipe mount (4x)
6 Bracket for wall and pipe mounting
7 Mounting foot (mounting bracket inserts) (2x)
Section 4 Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
5
A bracket for panel mounting is available as an optional accessory. Refer to
and accessories on page 22.
6
Used for variable diameter pipe mount installations.
8 English
8 Flat washer, ¼-inch ID (4x)
9 Lock washer, ¼-inch ID (4x)
10 Keps hexnut, M5 x 0.8 (4x)
11 Pan head screws, M5 x 0.8 x 15 mm (4x)
12 Pan head screws, M5 x 0.8 x 100 mm (4x)
5
13 Screwdriver, 2-mm wide blade
D A N G E R
Figure 2. If any items are missing or

Replacement parts

6