Oursson BM1010 Manual De Instrucciones página 19

SAFETY INSTRUCTIONS, Рiс. А
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity
of operating exactly according to the instructions.
When using electrical appliances should take the fol-
lowing precautions:
• Use the device according to the following instructions
manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the product set.
• To protect against risk of electrical shock do not
put the cord in water or other liquid. If for some
reason the water got into the unit, contact an au-
thorized service center (ASC) OURSSON AG.
• For power supply, use a power grid with proper char-
acteristics.
• Do not use the device in areas where the air can con-
tain vapors of flammable substances.
• Never attempt to open the device by yourself –
it could possibly be the reason of an electrical
shock can lead to product malfunction and will
invalidate the manufacturer's warranty. For re-
pair and maintenance, contact only authorized
service centers meant for repair of products un-
der the trademark OURSSON.
• When moved from a cool to a warm place and vice
versa unpack it before use and wait 1-2 hours without
turning it on.
• In order to prevent electrical shock do not im-
merse the entire product or the wires into the
water.
• Be particularly careful and cautious when using the
device near children.
• Do not touch any hot parts, as this may cause
injury.
• The power cord is specially made relatively short in
order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp edge of
the table or touch hot surfaces.
• Do not connect this device to a grid which is over-
loaded with other appliances: it can lead to the fact
that the device will not function properly.
• Do not install the device near gas and electric stoves
and ovens.
• After use, make sure to disconnect the device from
the power grid.
• Keep the device from bumps, falls, vibration and oth-
er mechanical influences.
• Make sure to disconnect the device from the power
grid before cleaning or changing accessories.
• Do not use the device outdoors.
• This appliance is not intended for use by persons
(including children) with reduced physical, senso-
ry or mental capabilities, or lack of experience and
Risk of burn symbol
Reminder for user
of high temperatures.
knowledge. They can only use the device under the
supervision of the person responsible for their safety,
or after instruction on the safe use of the device. Do
not allow children to play with the product.
• This product is intended only for use in the home.
• If the power cord is damaged, it must be replaced by
a specialist from the authorized service center (ASC)
OURSSON AG to avoid danger.
• Use only the tools, which are included in the product set.
• When cleaning the appliance do not use abrasives
and organic cleaners (alcohol, gasoline, etc.). When
cleaning the device it is allowed to use a small
amount of neutral detergent.
When you turn it on for the first time, there may
be a slight burn smell, which may be emitted
during the first heating of the heating element
of the device. During next uses, this smell won't
be emitting.
The operation of this device in any case does
not imply application of any force to it, as this
may damage the product due to user fault.
RECOMMENDATIONS
• Please read the instruction manual before using the
device. Keep the manual after reading for further use.
• All illustrations in this manual are schematic representations
of real objects, which may differ from the actual images.
The lid may be opened only when you need
to add different ingredients and only when you
hear a sound signal. Do not open the lid when
the device is working
• Do not remove the baking mold when the device is
working.
• Do not immerse the baking mold into the water.
• Be careful when using the mold, any damage may
lead to malfunction of the mold.
• Remove the baking mold only by the handle, do not
shake it.
Non-stick coating of the mold may change
color when exposed to moisture and steam,
but this will not affect its performance.
• The device must be placed on smooth horizontal sur-
face within 5 cm. from the wall/ furniture and 10 cm.
from the edge of the surface
• Do not cover the device whit a towel or napkin when
it is operating.
EN
19