ENGLISH
Advanced Recording
EASY Q Mode (for Beginners)
✤ The EASY Q mode allows a beginner to easily make good quality
video recordings.
I
The EASY Q mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode.
(see page 29)
2. By pressing the EASY Q button, all functions on the
camera will be set to off and the recording settings
will be set to the following basic modes:
I
Battery level, recording mode, counter,
DATE/TIME, and EIS (
I
The word "EASY.Q" will appear on the LCD
monitor at the same time.
However, the DATE/TIME will only be seen if it
has been previously set. (see page 59)
I
If you press EASY Q button, the blue light lights
to the button.
3. Press START/STOP to start recording.
I
Recording will begin using the basic automatic
settings.
I
The camera will return to the settings that were set prior to
activating EASY Q mode.
4. Pressing the EASY Q button again turns the EASY Q mode off.
I
The camera will return to the settings that were set prior to
activating EASY Q mode.
Notes
I
In EASY Q mode, certain functions are not available, such as
MENU, BLC, MF/AF.
-
If you want to use these functions, you must first switch the
EASY Q mode off.
I
The EASY Q mode settings are deleted when the battery pack is
removed from the camcorder and therefore must be reset when a
battery pack has been replaced.
) will be displayed.
EASY
Grabación avanzada
Modalidad SENCILLA (para principiantes)
✤ La modalidad sencilla (EASY Q) permite a los principiantes
obtener buenas grabaciones con facilidad.
I
La función EASY Q sólo opera en las modalidades CAMERA.
1. Ajuste el interruptor en la modalidad CAMERA.
(ver página 29)
2. Pulse el botón EASY Q para que se desactiven
todas las funciones de la videocámara. Los
EASY
ajustes de grabación se acomodarán a las
siguientes modalidades básicas:
I
Aparecerán en la pantalla las funciones nivel
de la batería, modalidad de grabación,
contador, FECHA/HORA y EIS (
STBY
I
0 : 0 0 : 0 0
Al mismo tiempo, aparecerá en la pantalla
5 5 min
LCD la palabra "EASY.Q". No obstante, la
función FECHA/HORA sólo se verá si se ha
ajustado previamente (ver página 59).
I
Al pulsar el botón EASY Q, se enciende el
piloto azul junto al botón.
1 0 : 0 0
3. Pulse START/STOP para comenzar la grabación.
1 0 . J A N . 2 0 0 4
I
La grabación empieza con los ajustes
automáticos básicos.
I
La videocámara volverá a los ajustes hechos antes de activar
la modalidad EASY Q.
4. Si vuelve a pulsar el botón EASY Q en la modalidad STBY, se
desactivará la modalidad EASY Q.
I
La función EASY Q no se desactivará cuando haya grabado.
I
La videocámara volverá a los ajustes hechos antes de activar
la modalidad EASY Q.
Notas
I
En la modalidad EASY Q, no se puede acceder a algunas
funciones como MENU, BLC y MF/AF.
-
Si desea usar estas funciones, primero deberá desactivar la
modalidad EASY Q.
I
Los ajustes de la modalidad EASY Q se borran cuando se quita la
batería de la videocámara y, por lo tanto, deberán ajustarse de
nuevo al reemplazarla.
ESPAÑOL
).
65
65