Zero Setting; Turning Off - Soehnle Professional 3710 STANDARD Instrucciones De Uso

Zero setting

Press the Zero button to correct any minor deviations from the zero
point, which may be caused by dirt on the scales.
Verifiable and non-verifiable zero setting range: -1 to +3% of the
weighing range.

Turning off

Press the ON/OFF button to switch off the scales.
If the scales are empty and the display indicates 0 weight, the scales
can be switched off immediately.
If the scales are loaded, press and hold the ON/OFF button for 5
seconds.
The equipment switches off when the button is pressed. When the mains plug is removed
from the power socket, the equipment is disconnected from all poles of the mains power
supply. This ensures that the equipment is powered down.
Note for the version with rechargeable battery:
If the display remains at »0.0 kg«, the scales will switch off automatically after a pre-set
time. In this case, the display can be activated again by pressing the ON/OFF button.
www.soehnle-professional.com
21