Hold Function - Soehnle Professional 3710 STANDARD Instrucciones De Uso

Hold function

The Hold function is activated with the Function key in Setting mode.
For Function key settings, see User mode 3710 (see separate
description 470.702.099, when needed for using scales or request
Soehnle Industrial Solutions).
In weighing mode, the Hold function is activated by pressing the
Function key.
In order to freeze the weight data, the following hold functions are
available as standard. Default is "0".
For Hold Function settings are carried out in the Setting Mode (see
separate description 470.702.099, User mode 3710, when needed for
using scales or request Soehnle Industrial Solutions).
Hold mode
Neutral measurement
To program the Function key, "Neutral measurement" must be selected
in Setting mode! For Function key settings, see chapter 1.13 or User
mode 3710 (see separate description 470.702.099, when needed for
using scales or request Soehnle Industrial Solutions).
The factor for entering the specific weight is the quantity of the
measured material relative to the calibrated unit weight (1 kg/1 g/
1 lb).
Entering the conversion factor in Setting mode
Press and hold the Print button then press the On/Off button for 5
seconds until UCAL 1 appears.
www.soehnle-professional.com
Function
0 Not active
1 Hold when stable
2 Hold when stable
3 Max. value
4 Max. value
5 Drag pointer
6 Drag pointer
To cancel
On/Off button
Unload the scales
On/Off button
Unload the scales
On/Off button
Unload the scales
19