General Instructions - Metrix MTX 1032-B Manual De Instrucciones

Sonda diferencial
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

English

General Instructions

You have just acquired an MTX 1032 differential probe.
Congratulations
Congratulations on your choice and thank you for your trust in the quality
of our products.
This differential probe is an important accessory for the MTX 3252 and
Introduction
MTX 3352 oscilloscopes.
There are 2 models of the MTX 1032 probes:
MTX 1032-B : 30 MHz model with female banana-socket inputs
MTX 1032-C : 50 MHz model with BNC inputs
This probe enables the differential input voltage to be attenuated and
converted into low voltage available on the BNC output.
The differential input is particularly useful for the measurement of
semiconductor power circuits since no reference earth is required.
It can be used for measurements on the following types of circuits:
600 V CAT III in relation to the earth (MTX 1032-B)
600 V CAT II in relation to the earth (MTX 1032-C)
Precautions
The protection provided by this probe may be compromised if wrongly
used.
The probe must only be used with a Class 1 oscilloscope connected to a
protective earth.
Do not open the instrument until you have disconnected the inputs
and the mains lead.
Measurement
CAT II: Measurement category II corresponds to measurements made
categories
CAT III: Measurement category III corresponds to measurements on
This equipment is guaranteed for 2 years against any defect in materials
Warranty
or workmanship, in accordance with the general terms and conditions of
sale.
During this period, the equipment can only be repaired by the
manufacturer. The manufacturer reserves the right to carry out repair or
replacement of all or part of the equipment.
If the equipment is returned to the manufacturer, initial transport costs
shall be borne by the customer.
MTX 1032-B - MTX 1032-C
on circuits connected directly to the low-voltage
installation.
Example: power supply for domestic appliances and portable
tools
building installations.
Example: power supply for industrial machines or devices.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mtx 1032-c

Tabla de contenido