Stihl Cutquik TS 700 Manual De Instrucciones página 8

Ocultar thumbs Ver también para Cutquik TS 700:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Inspect the abrasive
wheel frequently and
replace immediately if the
abrasive wheel is cracked
or warped. Cracked or
warped wheels may
shatter or break and cause serious or
fatal personal injury.
Out-of-round or unbalanced abrasive
wheels increase vibration and reduce
the service life of the cut-off machine.
Abrasive wheels are heat sensitive.
Always store your cut-off machine in a
place where the cutting wheel is not
exposed to direct sunlight or other
sources of heat. Store spare cutting
wheels in a dry place where there is no
risk of frost damage. Failure to follow
these directions may cause the wheel to
shatter or crack in use causing serious
or fatal injury.
TS 700
!
Warning!
Never use circular saw
blades, carbide tipped
blades, rescue blades,
wood-cutting blades or
toothed blades of any
nature. They can cause
severe personal injury from reactive
forces, blade contact or thrown objects.
See section on "Reactive Forces."
Your STIHL dealer stocks a range of
special abrasive wheels for the many
applications of the cut-off machine.
!
Warning!
Use of the wrong abrasive wheel or the
cutting of material for which the wheel
was not designed may cause the wheel
to shatter causing serious or fatal injury.
Only use the abrasive wheel approved
for the type of material to be cut. There
are different abrasive wheels, each
specially marked. For example:
English / USA
1. Stone
Also can be used for concrete,
masonry, reinforced concrete and
brick cutting.
2. Steel
Can be used for all ferrous metal
cutting.
3. Asphalt
Also can be used for aggregate
concrete cutting.
4. Ductile iron
Also can be used for certain grades
of cast iron (SG 17-24), bronze and
copper cutting.
For cutting composite materials please
ask your STIHL dealer.
Diamond Abrasive Wheels
Diamond abrasive wheels have a much
better cutting performance than
composite abrasive wheels. The
diamond wheels are steel centered, and
diamond particles are imbedded in their
cutting edges.
They can be used for concrete, asphalt,
natural stone, clay pipe, brick and the
like.
7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido