Sime Dewy 30 Guia Del Usuario página 103

– Other anomalies (fig. 6)
When one of the red "40÷80°C" leds
start flashing, switch-off the boiler and
then try to ignite again.
After 2 or 3 unsuccessful attempts, do
not try again but call authorised techni-
cal staff.
LOGICA REMOTE CONTROL
When "DEWY 30/80" is connected to the
"Logica Remote Control" regulator, the
selector CR/OFF/SUM/WIN/UNBLOCK
must be placed in the position (
knobs of the hot-water service heating
potentiometers do not have any effect and
all of the functions will be managed by the
regulator (fig. 7).
If the "Logica Remote Control" breaks
1
2
3
4
5
6
KEY
1 Display
2 Info button
3 Operating mode button: automatic operation
4 Operating mode button: manual operation
5 Operating mode button: availability
6 Cover with instruction compartment
7 Temperature knob
8 Presence button
down, the boiler will function by placing the
selector on the (
sly without consequent control of the room
); the temperature.
No interior da tampa estão indicadas as
instruções de funcionamento (fig. 8). Cada
programação ou modificação é visualizada
e confirmada no display (fig. 9).
7
8
Fig. 8
FLASHING RED LED
SPIA ROSSA INTERMITTENTE
o ), position, obviou-
KEY
1 Display, time
2 Heating programme
3 Unit (%/C°)
4 Presence button display
5 External temperature
6 Ambient temperature
7 Holiday function
8 Operating mode
9 Line number/day
10 Burner on
11 Heating function
12 Domestic hot water/temperature/D.H.W. load
Fig. 6
Fig. 7
Fig. 9
99