Sime Dewy 30 Guia Del Usuario página 104

ACTIVATING
During functioning the lid of the regulator must be closed.
– Selection of the operating mode
(reference keys grey colour)
– Info key
(reference key grey colour)
– Adjusting the temperature
100
Automatic functioning: the heating functions automatically according to the hea-
ting programme entered. The programme may be excluded for brief periods with
the on-line key.
Manual functioning: the heating functions manually according to the choice made
with the on-line key.
Availability: the heating is deactivated.
Day, hour, room temperature
External temperature*
Hot-water service temperature*
Before adjusting the temperature of the regulator, the thermostatic valves, which may be
present, have to be regulated to the desired temperature.
If it is too hot or too cold in your apartment, you can easily adjust the fixed
temperature with the temperature knob.
If you turn the knob towards the + sign, the fixed temperature is
increased by about 1 °C for every notch.
If you turn the knob towards the - sign, the fixed temperature is
decreased by about 1 °C for every notch.
Before adjusting it again, however, allow the temperature to stabilise first.
Note: With the temperature knob you can only adjust the fixed temperature, whilst the redu-
ced temperature remains the same.
The operating mode desired is selected by
pressing the relative key with the correspon-
ding symbol. The choice is displayed with the
symbol
For every operation of the Info key the fol-
lowing list of items, one after the other, are
displayed. The thermo-feeler continues to
function independently of the display.
* This data appear only if the relative feeler is
connected or if they are transmitted by the
regulator of the boiler.