Sime Dewy 30 Guia Del Usuario página 105

– On-line key
PROGRAMMING
For the programming the lid of the regulator must be open.
You can set or display the following values:
• Temperatures
• Heating programme
• Day of the week and hour
• Current values
• Vacation period
• Return to the default values
– Temperature regulation
NOTA: The choice made will work in a permanent way when manually
automatic
to the heating programme.
1 3
up to
4 1 1
up to
12 14
up to
15 17
up to
18
19
Before proceeding with the adjustment in the temperature on the regulator, the thermosta-
tic valves, which may be present, have to be regulated to the desired temperature.
In automatic mode, the apparatus switches from the fixed temperature to the reduced tem-
perature according to the temporal programme. The manual switching of the temperature is
done manually with the on-line key.
Fixed temperature:
1
temperature when the rooms are occupied
(basic setting)
Reduced temperature:
2
temperature during periods of absence or night
Hot-water service temperature:
3
– comfort temperature of the hot-water service
Reduced temperature of hot-water service:
61
temperature desired for hot-water service at reduced level.
To have access to the "reduced hot-water service temperature" parameter, press
the and
the entered lines with the key
with and
If the rooms remain unused for a long period of time, the temperatu-
re can be reduced with the on-line key, in this way saving energy. When
the rooms are occupied again, press the on-line key to re-heat them.
The current choice is displayed on the display:
Fixed temperature heating
Reduced temperature heating
it will work up to the next switching according
keys at the same time for at least 5 seconds and then go along
until parameter 61 is reached. Regulate the value
.
, carried out, instead, if
As soon as the cover is open,
the display and the key functions
are switched on.
The number in the square
represents the programme
lines that may selected with the
arrow keys.
101