To Remove The Transmission Cover; To Replace A Broken Lamp - Husqvarna P 520D Manual De Usuario

To remove the transmission cover

1. Remove the 4 screws.
2. Lift and remove the transmission cover.

To replace a broken lamp

1. Remove the 2 screws, one on each side, and
remove the cover.
2. Disconnect the cables at the connection (A).
A
126
3. Disconnect the cables from the broken lamp.
4. Push the broken lamp toward the inner lamp
attachment (B).
5. Lift the outer edge (C) of the lamp to remove the
lamp.
6. Replace the broken lamp. Use the type of lamp as
Technical data on page 142 .
given in
7. Connect the cables to the new lamp.
8. Connect the cables at the connection (A).
A
9. Attach the cover and tighten the 2 screws.
B
740 - 002 -
C