Cleaning And Care; Trouble Shooting - Unold 58105 Instrucciones De Uso

CLEANING AND CARE

1. Do not immerse the appliance
into water or any other liquid for
cleaning.
2. Wipe the surface and the housing
with a damp cloth.

TROUBLE SHOOTING

Fault Reason
E0 No cookware on the
plate, cookware not
fitted for induction,
cookware not placed
correctly in the middle
E01 Power circuit fault
E02 Temperature control
fault
E03 Variations of voltage
E04
E05 Too high surface tem-
perature
E06 Overheating due to fan
fault
E0A/E0B Overheating due to
fault of the tempera-
ture sensor
Unplug the appliance
and let it cool down
before cleaning it.
Copyright UNOLD AG | www.unold.de
3. Do not use any strong or abrasive
cleansers or sponges.
4. Do not pour water or any other liq-
uid on the hotplate.
5. If necessary you can use a cleanser
or scraper for ceran glass cookers.
6. Please clean the ventilation slots
regularly with a soft brush to pre-
vent dust deposits.
Reaction
Only use cookware approved for in-
duction cooking with a diameter of at
least 12 cm and max. 20 cm,
Place the cookware in the midldle of
the respective cooking plate.
Send the appliance to our technical
service for repair.
Send the appliance to our technical
service for repair.
In case of sudden fluctuations of the
voltage cooking is automatically inter-
rupted. After approx. 1 minute cook-
ing is continued.
If the surface temperature is too high,
an acoustic signal is given and the
appliance is shout off automatically.
As soon as the temperature has fall-
en to the normal temperature range,
cooking can be restarted.
In order to avoid overheating, we rec-
ommend to use low power or temper-
ature settings for small saucepans
and medium to high settings for large
saucepans .
As soon as the temperature has fall-
en to the normal temperature range,
cooking can be restarted.
Send the appliance to our technical
service for repair.
31