Display Messages and Troubleshooting (continued)
The bar code information stored in
the meter is lost. Slide and release
close the drum door. Make sure a test
drum is loaded in the meter.
There is no test drum in the meter, or
the bar code on the drum is damaged
or missing. Make sure your test drum
has two bar codes on it. Insert a new
test drum.
Chapter 5: Maintenance and Troubleshooting
to turn off the meter. Open and
The test reminder is turned on. The
test reminder symbol flashes on the
display and the meter beeps, if the
beeper is turned on.
78
ACCU-CHEK Customer Care Service Center 1-800-858-8072