Running a Blood Sugar Test with Blood from Your Fingertip
Before running your first test, make sure you set up your meter properly and run a control test.
See Chapters 1 and 2 for details.
To make sure the display is working properly, turn off the meter, then press and hold down
complete display. All the sections should be clear and should look exactly like the display as shown in Chapter 5,
"Maintenance and Testing." If not, call the ACCU-CHEK Customer Care Service Center at 1-800-858-8072.
1. Wash your hands with warm soapy
water and dry thoroughly. Dirty or
wet hands could affect results.
Chapter 3: Testing Your Blood Sugar
2. Slide and release
3. The meter turns on and briefly
shows symbols on the display.
42
.
4. A test strip automatically advances.
ACCU-CHEK Customer Care Service Center 1-800-858-8072
to see the
M
M