Running A Control Test - Accu-Chek Compact Plus Manual Del Usuario

Running a Control Test

You need your meter (with a test drum inserted) and control solution.
Note:
Your meter is designed to recognize the difference between ACCU-CHEK Compact Blue control solution
and blood. This control solution is a blue liquid.
To make sure the display is working properly, turn off the meter, then press and hold
display. All the sections should be clear and should look exactly like the display as shown in Chapter 5,
"Maintenance and Testing." If not, call the ACCU-CHEK Customer Care Service Center at 1-800-858-8072.
1. Slide and release
Chapter 2: Control Testing
. 2. The meter turns on and briefly
shows symbols on the display.
3. A test strip automatically
30
ACCU-CHEK Customer Care Service Center 1-800-858-8072
to see the complete
M M
advances.