Setting The Beeper - Accu-Chek Compact Plus Manual Del Usuario

You are here
BEEPER

Setting the Beeper

Your new meter has the beeper preset to "On 1." This means the beeper is on.
You can set the beeper to "OFF," if you prefer – this will not affect your test
results.
The beeper is helpful because it prompts you:
• To apply blood or control solution to the test strip
• When enough blood or control solution is drawn into the test strip
• When the test is complete
• When it is time to test, if you set the test reminders
• If an error occurred while testing, even if the beeper is set to "OFF," it
still beeps for an error
Chapter 1: Understanding Your New Meter
BRIGHTNESS TIME / DATE TEST REMINDERS
11
ACCU-CHEK Customer Care Service Center 1-800-858-8072
HYPO
Press –
S S
• To enter the set mode
• To set the selection
• To move to the next function
Press –
M M
• To change the selection
• To move back and forth in
a selection