Setting the Hypoglycemic (Hypo) Indicator
BEEPER
1. With the meter off, press
enter the set mode. The meter
turns on and briefly shows
the display symbols. Next, the
beeper symbol is displayed with
your current selection flashing.
Chapter 1: Understanding Your New Meter
BRIGHTNESS
TIME / DATE
to
2. Press and release
S
S
until you reach the display with
"hypo?" displayed and "OFF"
flashing.
TEST REMINDERS
repeatedly
3. Press
S
S
20
ACCU-CHEK Customer Care Service Center 1-800-858-8072
(continued)
You are here
HYPO
to turn on the hypo
M
M
indicator and the display shows
"60 mg/dL" and "hypo?" with
the "60" flashing. Press
select the hypo level of 60, 70,
or 80 mg/dL.
to
M
M